Transcript
DDS-CAD HVAC-Plumbing Feature List
Common CAD Features
Proprietary CAD System, does not require separate CAD program.
Object database with technical data, parametric symbols and objects
DXF/DWG/IFC import and export
Network ready with multi user access at project level
Dual screen capability
Automatic project data in title fields and legends
Revision management
Multi disciplinary collision detection
2D/3D construction/drawing
Associative dimensioning and hatch definition
Intelligent context sensitive menu, context sensitive tool boxes
Quick edit via keyboards
Unlimited number of layers with multi disciplinary layer
administration
Automatic and manual layer assignment
3D Visualisation
Schedules
Structured Bills of Quantity (BOQ) by building, storey, room
Transfer BOQ to text editor, MS-Word or MS-Excel
Interface to/integration with costing and estimating
Layout and planning in 2D or 3D
Configurable, automatic room labels
Automatic associative building dimensioning
Intelligent and automatic ceiling grid construction
Builderswork planning with automatic marking
Production of escape route plans
Production of fire-brigade plans
buildingSMART/IFC Certification
DDS-CAD products have been certified by
the buildingSMART Implementation Support
Group as having an approved import and
export facility for IFC versions 2x, 2x2 and 2x3
System requirements
DDS-CAD 7 will run comfortably on a
standard Office PC running Windows
XP®, Windows Vista® or Windows 7®
Building Information
Modelling (BIM) for HVAC,
Plumbing Design and
Documentation
HVAC/Plumbing Design
Complete 2D and 3D design of pipe systems
Comprehensive catalogue of standard 2D symbols and 3D objects
Boilers, pumps, calorifiers, control valves, expansion vessels
UK specific manufacturer content
Intelligent virtual 3D model with multi-storey connection logic
Automatic 2D/3D pipe distributor and manifold design
U-value and heat loss calculation
Automatic selection and positioning of radiators
Pipe sizing, pressure loss calculation and valve settings
Schematic system diagram generation from the model
Underfloor heating system design to BS EN 1264
Positioning of underfloor heating manifolds
Setting out of underfloor heating zones (High/Low temperature)
Above/below ground drainage and domestic services design
Placement of sanitary devices and fittings
Complete 2D and 3D design of duct systems
Fans, air handling units, air terminals, chilled beam units
Detailed design of plant room layouts
Duct sizing and pressure loss calculation
Automatic terminal and damper setting calculation
Automatic connection of intelligent objects
Integrated design for builderswork openings and chases
Integration with advanced simulation tools
Integration with DDS-CAD Electrical for full MEP design
Don’t get left behind.
Contact us now!
Corporate Headquarters
Data Design System ASA
Telephone: +47 51 78 89 00
E-Mail:
[email protected]
German Subsidiary
Data Design System GmbH
Telephone: +49 (0) 2593/9199 91
E-Mail:
[email protected]
www.dds-cad.com
DDS-CAD HVAC-Plumbing 7
DDSHVAC.ver05.2010
DDS-CAD 7
“The extraction of quantities by a click of
the mouse from the installation planning
saves a lot of time. There is no other
CAD system on the market that offers
the same level of capability.” - Wolfgang
Fiegl, Sulzer and Partner, Germany
DDS-CAD HVAC-Plumbing Features
Comprehensive Catalogue of
Standard Symbols and Objects
Intelligent Virtual 3D model with
Multi-Storey Connection Logic
Import or Create 3D Building
Models
Integration with Advanced
Simulation Tools
DDS-CAD can import and work with
intelligent IFC models which can be
created by all the leading architectural
modelling packages such as Autodesk
Architectural Desktop®, Autodesk
Revit®, Bentley Architecture®, Graphisoft
ArchiCAD® and Nemetschek Allplan®.
You can also create 3D building models
directly in the software with reference
to 2D floor plans, or even scanned
images.
DDS-CAD can be used in conjunction
with advanced building simulation
tools to develop the required cooling
and ventilation requirements for
the building. If you have imported or
created a 3D model, then you will be
able to perform advanced simulation on
the model using Riuska™, EnergyPlus
or any other tool which supports IFC
model data.
The product comes complete with a
library of over 20,000 standard symbols
and objects which you can use to create
your models. The symbols are based
on International drawing conventions,
while the 3D symbols are representative
of typical equipment available both in
Europe and worldwide.
When you develop duct systems which
span multiple floors of the building, DDSCAD provides an intelligent connection
between the network at each level.
These generic objects can be quickly
and easily replaced with manufacturer
specific objects to finalise your
designs.
DDS-CAD allows you to develop the
duct networks manually, or to calculate
the required duct sizes using the builtin calculation tool. The tool can either
calculate the pressure drop for the
system as defined, or select appropriate
sizes based on your desired settings.
It can also balance the duct network
by altering the settings of the volume
control dampers and terminals in the
system.
Bills of Quantity
Duct sizing and Pressure Loss
Calculation
Pressure Loss Calculations
Automatic Connection of
Intelligent Objects
About Data Design System
For 25 years DATA DESIGN SYSTEM
has developed complete CAD
solutions for the construction
industry. With more than 13,000
users world-wide, Data Design
System is one of Europe’s leading
construction software houses.
Data Design System ASA has its
headquarters in Stavanger, Norway
and has a strong financial base
resulting from the company’s
commitment to innovation and
value for money. High standards
of development and customer
care are maintained by substantial
investments in R&D and product
support each year.
The high level technical quality
of the products and their various
applications are the results
of many years of practical
construction
experience
and
intensive international research
and development work. Based
on a proprietary CAD Core, Data
Design System offers modular,
object-oriented solutions, which
are adaptable to the needs of the
users.
Data Design System ASA has a
subsidiary in Germany, and is listed
under the symbol DDSY on the
Norwegian OTC stock market.
Work with Reference 2D Floor
Plans
If you do not have access to a 3D model
of the building, you can still develop the
HVAC systems in 3D with reference to
2D floor plans provided by the architect.
DDS-CAD supports both the DWG and
DXF file formats. DDS are members of
the OpenDWG Alliance,
U-value and Heat Loss
Calculation
To provide the basis for the heating
system design, DDS-CAD HVACPlumbing includes built in calculations
for building element U-Values and
building heat losses.
“There is no other CAD system on the
market that offers the same level of
capability”
Integrated MEP Design
Manufacturer Specific Content
DDS-CAD can work together with our
Electrical product to give you full MEP
design capability. The products can
be used simultaneously on the same
project by multiple users via a network.
A selection of manufacturer content
is provided with DDS-CAD, from
companies such as Stelrad, Danfoss,
Fläkt Woods, Actionaire and others.
DDS can also provide and support
specific manufacturer databases on
request, please contact us for further
details.
Efficient Design of Duct and
Pipe Networks
With DDS-CAD you can develop your duct
systems using intelligent objects rather
than simple 2D line tools. Equipment,
ducts and fittings have pre-defined
connection points which makes the
creation of systems fast and efficient.
“Smart Start” technology highlights the
available connection points making it
easy to build your networks accurately
and with confidence.
Connecting the components of
your duct network together is made
as simple as possible in DDS-CAD.
Intelligent objects have pre-defined
connection points which allow you to
build up your networks quickly and
efficiently. Equipment such as air
handling units have connection points
for electrical, piping and drainage, as
well as ductwork.
Visualisation and Animation
Schematics
Underfloor Heating Design
DDS-CAD includes facilities for the
design of underfloor heating systems.
You can plan your system using our builtin calculation module which will select
the correct pipe spacing arrangement
based on the requirements of EN
1264.
Drawing Production
