Transcript
DIY: Remove a Locked Doorknob from the Outside dvslocksmith.com/2021/07/19/remove-locked-doorknob-from-outside
A doorknob lockset is a spherical lock that consists of two knobs on each side of the door. The knob has a button on one side, which locks and unlocks the door. However, The door can also be locked or unlocked from the other side by using a key. These knobs are primarily used for doors inside the house as they lack security compared to other door locks. The problem occurs when the knob is locked, and you do not have the keys. In this case, you have two options. You can contact Lockout Service in Norridge. You can remove a locked doorknob from outside yourself by following the instructions in this article.
Tools Required to Remove a Locked Doorknob from the Outside It would be best if you had the following tools before you attempt to remove a locked doorknob Phillips Screwdriver Flathead Screwdriver Paper Clip or Bobby Pin Pliers
Remove Doorknobs without Screws If your doorknob does not have screws, the process can become a little complicated. Determine the type of knob Some doorknobs have hidden levers for security. The doorknob with a hidden lever will either be a thin slot or a pinhole. It is essential to find out the kind of knob you have. Hold Down the Secret Latch A doorknob lockset has a secret latch at the base of the knob. Hold down the latch with a tool. If the latch is a thin slot, use a screwdriver to hold down the latch inside. If the latch is a pinhole, use something thin like a paperclip or a bobby pin. Remove the Knob by Pulling While holding down the latch, start pulling the doorknob. If it does not come loose, twist it and wiggle it. It will come loose, and you will be able to remove the knobs from both sides.
Remove a Broken Doorknob
1/5
A broken doorknob can be very frustrating. A doorknob has a spindle inside. When the knob rotates, it rotates the spindle inside along with it. As a result, the spindle locks and unlocks the door accordingly. If the knob rotates but the spindle does not move, it means that the lock is broken. It would help if you fixed the spindle and the latch to fix a broken doorknob. Use Pliers to Access the Lever Firstly, you have to remove the knob as mentioned above. Secondly, grab a plier to hold the lever. Rotate the lever clockwise to remove the lock. However, it will need some force as the lock could be jammed to the strike plate. Use Pliers to Access the Shaft Use Pliers to hold the shaft where the lever extends. Move it clockwise, and the door will open. Follow the process of removing the complete lock after this.
2/5
Remove DoorKnobs with Screws The job will be much easier if you have visible screws on your doorknob. Use a screwdriver to unscrew all of the visible screws on the doorknob. After unscrewing, wiggle the knob to check if it has turned loose. 3/5
Pull or wiggle the knob to remove it from the lock after it has turned loose.
Removing the Complete Lock After removing the knobs, you have to remove the rest of the lock. However, you can either contact Lock Installation in Norridge or do it yourself by following the instructions below: Remove the Faceplate After removing both knobs, take a flathead screwdriver and wedge it under the rear of the faceplate. It requires some force if the faceplate is jammed. Wiggle the screwdriver slowly to loosen the faceplate. Once you know it is loose, you can take it apart with your hands. Remove the Screws from the Knob After removing the faceplate, you will notice that there are screws inside your knob. These screws are the ones that attach the lock to the door. Remove these screws with a screwdriver. Removal of these screws will result in the lock getting loose. As a result, you can easily draw out the lock from the door after this. Remove the Bolt and Strike Plate The bolt is a piece of metal that extends through the door into the strike plate to lock the door. It will loosen up itself after removing the other parts. If it doesn’t, take a screwdriver and unscrew it. The strike plate is the other part of the lock attached to the opposite side of the lock. It is used to lock the door with the bolt. It also has two screws and a screwdriver can easily remove it.
4/5
Conclusion In conclusion, The issues discussed above are common among doorknobs, especially if you have old doorknobs. Rust can build up inside the lock, which can cause problems. It is better to replace the lock if it causes problems frequently. You can either call a professional locksmith or do it yourself if you have the tools and a little experience. If you don’t, it is better to call a locksmith to save money by making matters worse.
5/5
