Transcript
Carb Cap: Why use it in a dab rig? articlesacademy.com/carb-cap-why-use-it-in-a-dab-rig
A carb cap is a dome-shaped device that has an opening at the top. It sits on top of your banger or nail and traps heat from your lighter, helping to vaporize concentrates. For years, carb caps have been used by glassblowers as a decoration. But, they’ve also become a great way for people to enjoy their concentrates with clean, tastier hits.
How does a carb cap work A carb cap works by increasing the surface area between your best dab pen and hot nail. This allows for more even vaporization, which means you get every last bit of terpenes out of your dabs. A bonus is that it also produces bigger hits than without one. Carb caps are usually dome-shaped with holes to allow airflow and control how much vapor is inhaled at once. They sit on top of the rig’s banger or dish, so the concentrate you have doesn’t go straight from super-hot to room temperature air as soon as it’s off the heat source. This preserves the flavor better because it stays hotter longer. It also allows terpenes to burn away less quickly after being exposed to oxygen when lifted off the nail. For it to function correctly, the carb cap must be on top of a domeless nail so that it can create vapor bubbles and help cool it off more rapidly. Furthermore, if you have a banger with a built-in dome/carb hole, your dab should be placed on this site first before being covered by the carb cap. Also, remember that any part of the hotdish or banger will heat up whatever concentrate is touching it. Therefore, only some parts will get “dabbed” when using a traditional rig setup, which is not ideal if efficiency matters to you!
1/3
Electric nails are great for use with carb caps because they produce low amounts of excess heat. Nevertheless, ideally one would want to go either fully e-nail or fully domeless setup.
The benefits of using a Carb Cap: Carb caps work by increasing the surface area between your dab and nail to avoid losing as many terpenes in vaporization. Consequently, it means bigger hits! Electric nails produce little excess heat, making them great for use with carb caps! Also, they help preserve flavor due to less exposure from oxygen when lifted off the nail. It is a perfect accessory for those who like low temp dabs.
Why use a carb cap in your dab rig? The reason for this is that the cap traps all of the vaporized terpenes inside. As a result, it has a more flavorful hit. This also provides you with better flavor as well as higher THC content per day! When using a dab rig without a carb cap, some of those tasty terpenes escape into the air and are wasted.
The best type of carb caps for different kinds of rigs Just like any other accessory in a water pipe setup, there are various ways to use a carb cap while you’re enjoying your favorite concentrate! You can use carb caps with different types of rigs. However, it is important to make sure that the cap fits your particular piece. A carb cap for an electric rig will not fit or function properly on a traditional glass bong or bubbler and vice versa. Usually, Electric nails feature holes at the top where you place the carb cap, so they work very well together. The steam created from using this combination is thick and flavorful. Since the vapors from a traditional glass bong or bubbler are not as thick, using a carb cap with this type of rig is vital. Altogether, you need to find a carb cap that is appropriate for your type of dab rig. Many carb caps are cylindrical and cone-shaped. They vary in size, but they all have a hole in the top with a protruding stem for safety purposes. Although some of these come with squeeze-bulbs attached to their stems for easier use or built-in storage compartments, you can purchase them without any extras. Carb caps also come with holes at the bottom of them, allowing you to place them over top of your banger or dish without touching any part of it. This is important because these pieces are generally very hot and touchable! Just be careful not to drop them! Furthermore, if you do happen to drop your carb cap by accident, it should not shatter. Carb caps are made from either borosilicate glass or quartz to prevent this type of accident from ruining your day!
How to properly clean and maintain your carb cap
2/3
After use, remove the stem and wipe the inside with a towel. Then soak in hot water for twenty minutes to allow any leftover residue to sink to the bottom of your container. After this, remove it from the water and dry carefully before storing it away for next time!
Conclusion In summary, Carb Caps are a must-have for your dab rig. They offer the best of both worlds with the convenience and ease of use of an oil rig. Furthermore, they can produce powerful vapor clouds like a water pipe. So don’t be fooled by cheap imitations that cover up flavor or percolate too much. Get yourself a quality carb cap today!
3/3
